Dip Molded PlasticRound Grips - Flat End

GripWorks offers the industry’s most complete line of hand grips for round bars and tubes. The unique dip molding production process allows hundreds of variations with respect to wall thickness, hardness, inside length, surface texture, and color.

The following chart highlights our extensive line of round grips that range from 0.187” to 3.500” in diameter. Each set of tooling can manufacture grips in any length up to the maximum inside length stated in the chart. However, some grips can be made in lengths measuring up to 24”. For the most popular sizes, both round end and flat end tooling is available.

Shop Online Now   Quote and Sample Request

Round Grips - Flat End

Inside Diameter "A"		Max Inside Length "B"		Nominal Wall Thickness "C"
				(At Min Length)		(At Max Length)
in	mm	in ±.062	mm ±1.57	in ±.010	mm ±.25	in ±.010	mm ±.25
0.187	4.75	3.500	88.90	0.055	1.40	0.055	1.40
0.207	5.26	3.500	88.90	0.055	1.40	0.055	1.40
0.281	7.14	5.000	127.00	0.060	1.52	0.065	1.65
0.313	7.95	6.000	152.40	0.060	1.52	0.065	1.65
0.375	9.53	6.000	152.40	0.065	1.65	0.075	1.91
0.437	11.10	6.000	152.40	0.065	1.65	0.075	1.91
0.500	12.70	8.500	215.90	0.065	1.65	0.075	1.91
0.562	14.27	6.000	152.40	0.065	1.65	0.075	1.91
0.610	15.49	6.750	171.45	0.065	1.65	0.075	1.91
0.625	15.88	6.000	152.40	0.065	1.65	0.075	1.91
0.687	17.45	6.000	152.40	0.065	1.65	0.075	1.91
0.725	18.42	24.000	609.60	0.065	1.65	0.075	1.91
0.730	18.54	6.000	152.40	0.065	1.65	0.075	1.91
0.750	19.05	6.000	152.40	0.065	1.65	0.075	1.91
0.812	20.62	6.000	152.40	0.070	1.78	0.080	2.03
0.830	21.08	6.000	152.40	0.070	1.78	0.080	2.03
0.843	21.41	6.000	152.40	0.070	1.78	0.080	2.03
0.875	22.23	24.000	609.60	0.070	1.78	0.080	2.03
0.921	23.39	24.000	609.60	0.070	1.78	0.080	2.03
0.937	23.80	24.000	609.60	0.070	1.78	0.080	2.03
0.950	24.13	6.000	152.40	0.070	1.78	0.080	2.03
1.000	25.40	24.000	609.60	0.070	1.78	0.080	2.03
1.062	26.97	6.000	152.40	0.070	1.78	0.080	2.03
1.125	28.58	24.000	609.60	0.070	1.78	0.080	2.03
1.187	30.15	6.000	152.40	0.070	1.78	0.080	2.03
1.220	30.99	10.000	254.00	0.070	1.78	0.080	2.03
1.250	31.75	6.000	152.40	0.070	1.78	0.080	2.03
1.375	34.93	6.000	152.40	0.070	1.78	0.080	2.03
1.500	38.10	6.000	152.40	0.070	1.78	0.080	2.03
1.625	41.28	6.000	152.40	0.070	1.78	0.080	2.03
1.687	42.85	6.000	152.40	0.070	1.78	0.080	2.03
1.750	44.45	6.000	152.40	0.070	1.78	0.080	2.03
2.000	50.80	6.000	152.40	0.070	1.78	0.080	2.03
2.250	57.15	6.000	152.40	0.070	1.78	0.080	2.03
2.500	63.50	6.000	152.40	0.070	1.78	0.080	2.03
2.750	69.85	6.000	152.40	0.070	1.78	0.080	2.03
3.000	76.20	6.000	152.40	0.070	1.78	0.080	2.03
3.250	82.55	6.000	152.40	0.070	1.78	0.080	2.03
3.500	88.90	6.000	152.40	0.070	1.78	0.080	2.03
Chart for typical single dip wall specs - Formulas (Flexfit, Softex™, etc.)